New Valor Trailers
View By:
- List
- Book
Show Categories
Previous
Page of
Next
-
2022 VALOR 16TUS UTILITY TRAILER W/ 5 FT. STATIONARY DECK
GVWR: 19,200 lbs. Capacity (Distributed): 15,280 lbs. Base Trailer Weight: 3,920 lbs. Frame Construction: 5" x 3" Tubular Subframe w/ Perimeter Rails Crossmembers: 3" x 1.5" Tubular Crossmembers on 16" Centers Hitch: 2-1/2" ID Lunette Eye w/ Adjustable Height Landing Gear: 12,000 lb. Capacity w/ Drop Foot Safety Chains: (2) 3/8" x 36" Grade 70 High Tensile Strength w/ Slip Hooks & Safety Latches Deck Latch Over-Center Slider Shaft Latch w/ Tension Adjuster & Safety Pin Cushion Cylinder: 3" x 8" w/ Internal Metered Flow to Cushion Loading & Unloading Load Securement: 12 Total (6 per side) 1" Diameter D-rings & Stake Pockets Tool Box: Combination Open Tool Tray and Lockable Lid Axles: (2) - 8,000 lb. Capacity Hubs: 8 - 6.5" Bolt Circle w/ 5/8" Lug Nuts Brakes: 12-1/4" x 3-3/8" Electric Brakes both Axles w/ 12 Volt Sealed Breakaway System Suspension: Rubber Torsion Wheels: 17.5" x 6.75" 8 on 6.5" Bolt Pattern Tires: ST215/75R17.5 Radial Load Range H Finished Preparation: Sandblasted Finish Coating: 1 Stage Zink Based Paint Electrical: Phillips Sealed Harness System w/ Rubber Isolated LED Lighting Decking: 2" Rough Surface No.1 Grade Fir w/ Fasteners at every other Crossmember Decking Width: 82-1/2" Between Fenders
Price: Call
Specs and price subject to change… -
2022 VALOR 12TU UTILITY TRAILER
N-2457 — Valor Trailers / All
2022 VALOR 12TU UTILITY TRAILER
GVWR: 16,800 lbs. Capacity (Distributed): 13,880 lbs. Base Trailer Weight: 2,920 lbs. Frame Construction: 5” X 3” Tubular subframe and perimeter rails Crossmembers: 3”X 1.5” Tubular crossmembers on 16” centers Hitch: 2-5/16” Ball Coupler or 2.5” ID Lunette eye, adjustable height Landing Gear: 12,000 lb. capacity with drop foot Safety Chains: (2) 3/8” X 36” Grade 70 high tensile strength with slip hooks and safety latches Deck Latch: Over-center standard latch and safety pin Cushion Cylinder: 3” X 8” with internal metered flow to cushion loading and unloading Load Securement: 8 each (4 per side) 1” diameter D-rings and stake pockets Tool Compartment: Combination open tool tray and lockable toolbox Axles: (2) 7,000 lb. capacity Hubs: 8 on 6.5” bolt circle with 9/16” lug nuts Brakes: 12” x 2” electric brakes both axles with 12 Volt sealed breakaway system Suspension: Rubber torsion Wheels: 16” X 6” 8 on 6.5” bolt pattern Tires: ST235/80R16 Radial Load Range G Finish Preparation: Sandblast Finish Coating Powder Coat with zinc primer Electrical: Phillips sealed harness system with rubber isolated LED lighting Decking: 2” rough surface No. 1 grade Fir with fasteners at all crossmembers Decking: Width 82.5” Between fenders
*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE BASED ON CONTINUOUS IMPROVEMENTS
Price: Call
Specs and price subject to change…