New Sales
View By:
- List
- Book
Show Categories
Previous
Page of
Next
-
NEW SWAPLOADER SL-400 ADJUSTABLE JIB HOIST
SL-400 hooklift hoist. 40,000 lbs. lifting / dumping capacity. 14’-18’ length bodies with 14’-16’ being optimum. Horizontal sliding jib, slide through body locks, dual lift / dump cylinders with integral dual counter balance valves, low pressure hydraulics, duel rear pivot section, jib lock-out safety valve, nylatron slide pads, adjustable jib (53 7/8” – 61 ¾”) 2-section in-cab air controls, built in the USA , and 4-year all parts warranty. Optimum CT is 138” and 191” of CF needed. (Comes with hydraulic pump with L.H. rotation) Serial# WO1060
Price: Call
Specs and price subject to change… -
NEW BEAU-ROC 16 FT. DBH 1/4" HARDOX 450 DUMP BODY
• Semi-elliptical (44” Floor to side radius, 30” Flat floor). • 42” Sides. • Made out of ¼” Hardox450. head-sheet, floor, sides, and tailgate. • Dual acting (high lift and top swing) tailgate with air cylinders mounted in rear corner post. • Single Acting, trunnion mounted, Mailhot cylinder (16’= 160”) • 12” spreader apron • (1) ditch gate mounted in center of tailgate • 24” cab guard • Ladder mounted street-side • In-cab air controls • Body Prop • Comes with frame mounted hydraulic tank, hyd. dump pump, rear hinge, cradle, mounting brackets, hoses and fitting kit, and electrical kit. • Primed with 4mm epoxy primer
PRICE DOES NOT INCLUDE: INBOUND FREIGHT, FET OR SALES TAX
Price: Call
Specs and price subject to change… -
2022 BEALL 9,500 GAL. 4 COMPT. 2-AXLE SEMI TANK TRAILER
N-2410 — Petroleum Tank Trailers / Semi Trailers
2022 BEALL 9500 GALLON 4-COMPARTMENT 2-AXLE ALUMINUM SEMI TANK TRAILER
DOT406AL, 9500 gallons shell full, 4 compt. ( 4100-2100-1100-2200 ), double bulkheads, frameless double conical aluminum construction, polished rear head, 4” Betts air operated internal valves, Bayco 4” load / unload API valve on each comp't with in-line site glass, brake interlock bar covering bottom loading heads and both vapor recovery outlets, Bayco Flo-Tech 5 wire system with no control module, Optic socket, (4) hose tube cluster with 2- 6” tubes( polished ) and 2- 7” tubes located curbside rear with front openings, 1 ½” X 14’ stick tube, aluminum ladder at front, catwalk drains thru ladder uprights, aluminum fenders front & rear, 48”L x 30”H x 24”D- shell mounted aluminum fitting box installed curbside, 2 speed landing gear with sand shoes, Hendrickson air ride suspension with dump valve, Meritor Wabco ABS brakes with Roll Stability System, Alcoa 8.25 X 22.5 aluminum wheels, 275/80R22.5 radial tires, polished aluminum DOT rear bumper………….
Price: Call
Specs and price subject to change… -
2022 BEALL 9,500 GAL. 4 COMPT. 2-AXLE SEMI TANK TRAILER
N-2411 — Petroleum Tank Trailers / Semi Trailers
2022 BEALL 9500 GALLON 4-COMPARTMENT 2-AXLE ALUMINUM SEMI TANK TRAILER
DOT406AL, 9500 gallons shell full, 4 compt. ( 4100-2100-1100-2200 ), double bulkheads, frameless double conical aluminum construction, polished rear head, 4” Betts air operated internal valves, Bayco 4” load / unload API valve on each comp't with in-line site glass, brake interlock bar covering bottom loading heads and both vapor recovery outlets, Bayco Flo-Tech 5 wire system with no control module, Optic socket, (4) hose tube cluster with 2- 6” tubes( polished ) and 2- 7” tubes located curbside rear with front openings, 1 ½” X 14’ stick tube, aluminum ladder at front, catwalk drains thru ladder uprights, aluminum fenders front & rear, 48”L x 30”H x 24”D- shell mounted aluminum fitting box installed curbside, 2 speed landing gear with sand shoes, Hendrickson air ride suspension with dump valve, Meritor Wabco ABS brakes with Roll Stability System, Alcoa 8.25 X 22.5 aluminum wheels, 275/80R22.5 radial tires, polished aluminum DOT rear bumper………….
Price: Call
Specs and price subject to change… -
2022 BEALL 550 CF. 1-AXLE SEMI AND 550 CF. 2-AXLE PULL TRAILER
N-2268-2269 — Pneumatic Trailers / Doubles
1-AXLE SEMI TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side rear, Terminate with 4" female coupler and plug, 3" Harco silencer installed downstream of street-side air inlet, (2) ribbed aluminum fenders over rear axle, (1) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, Jost two-speed with sand shoes, pintle hitch at rear…
2-AXLE PULL TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side front, Terminate with 4" female coupler and plug, Big ring turn table, (4) ribbed aluminum fenders, (2) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, 2” X 4” X 1/8” rectangular steel tubing with steel mesh walkway, (2) double bushed hinge assemblies, (1) premier shock housing with hardened eye, (1) single step located street-side rear…
Price: Call
Specs and price subject to change… -
2022 BULK 5,600 GAL. 1 COMPT. 2-AXLE X-RING SEMI TANK TRAILER
N-2342 — Tank Trailers / External Ring - Non-Code
2022 BULK 5600 GALLON SINGLE COMPARTMENT 2-AXLE X-RING SEMI TANK TRAILER
NON-SPEC, 5600 gallon, single compartment with (2) 10 gauge T304LSS-2B finish baffles, 30” drop/double conical/equal split, SS channel circumferential stiffing rings, stainless sub-frame material, 13# max. product, 150# max. product temp., 10 gauge stainless T304SS-2B finish head material, 12 gauge T304SS-2B finish shell material, 20” full opening manhole with SS spilldam around manhole & (2) 1-½” drain hoses, (2) 3” cleanouts in top of tank shell, (1) 4” x 4” x 90 degree SS elbow connected to spool piece extending to curbside, (1) 4” Betts WD400ALB butterfly valve with SS adapter & dust cap, (1) Betts # 6460463SSV pressure/vacuum vent located on manhole cover, curbside stainless ladder, 8” x 21’ hose tube with doors on each end mounted on curbside (no hoses), front & rear aluminum contour fenders with SS braces, Jost 2 speed landing gear, Hendrickson Intraax air ride suspension, Meritor RRS roll stability and ABS brakes, 10-hole hub piloted 22.5 aluminum wheels, 11R22.5 tires, black undercarriage paint…….
Price: Call
Specs and price subject to change… -
2022 BEALL 550 CF. 1-AXLE SEMI AND 550 CF. 2-AXLE PULL TRAILER
N-2369-2370 — Pneumatic Trailers / Doubles
1-AXLE SEMI TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side rear, Terminate with 4" female coupler and plug, 3" Harco silencer installed downstream of street-side air inlet, (2) ribbed aluminum fenders over rear axle, (1) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, Jost two-speed with sand shoes, pintle hitch at rear…
2-AXLE PULL TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side front, Terminate with 4" female coupler and plug, Big ring turn table, (4) ribbed aluminum fenders, (2) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, 2” X 4” X 1/8” rectangular steel tubing with steel mesh walkway, (2) double bushed hinge assemblies, (1) premier shock housing with hardened eye, (1) single step located street-side rear…
Price: Call
Specs and price subject to change… -
2022 BEALL 579 4500 GAL. 3-AXLE TANK TRUCK AND 2022 BEALL 5500 GAL., 3-COMPT., 2-AXLE ALUMINUM PULL TANK TRAILER
N-2351-2352 — Tank Trucks / Truck & Trailer
2022 PETERBILT 579 3-AXLE/2022 BEALL 4500 GALLON SINGLE COMPARTMENT ALUMINUM TRUCK TANK
DOT406AL, 4500 gallon, single compt., polished rear head, 4” Betts air operated internal valve, Bayco 4” bottom load API valve on “Y” branch with brake interlock, curbside and streetside vapor and discharge piping, Bayco Flo-Tech 5 wire system with no control module, Optic socket, sight glass on gravity drop, vapor recovery, stacked 7” & 6” polished aluminum hose tubes with fitting box at end mounted curb side, 1½ “X 14’ polished aluminum stick tube, Beall “Hook” style bucket holder, rear aluminum ladder at rear with non-slip steps, catwalk drains thru ladder uprights, Amerex 20# PURPLE-K fire extinguisher, DOT rear bumper, (2) smooth aluminum full tandem double radius fenders with Beall logo mudflaps…
2022 BEALL 5500 GAL., 3-CPT., 2-AXLE ALUMINUM PULL TANK TRAILER
DOT406AL, 5500 gallon, 3 compt. (2200-1100-2200), double bulkheads, 8” drop to center double conical construction, polished rear head, 4” Betts air operated internal valves, Bayco 4” bottom load API valve on “Y” branch with brake interlock, curbside and streetside vapor and discharge piping, Bayco Flo-Tech 5 wire system with no control module, Optic socket, sight glass on gravity drops, vapor recovery, stacked 7” & 6” polished aluminum hose tubes with fitting box at end mounted curb side, big ring turn table, draw bar with steel mesh walkway and jack stand, Hendrickson air ride suspension, Meritor Wabco ABS brakes with Roll Stability System, Alcoa 8.25 X 22.5 aluminum wheels, Michelin XTE 275/80R22.5 tires, (2) Hogebilt front quarter fenders, (2) smooth aluminum single axle full radius fenders with Beall logo mudflaps…
Price: Call
Specs and price subject to change… -
2022 WALKER 6500 GAL., 1 COMPT., 2-AXLE INSULATED STAINLESS STEEL FOOD GRADE SEMI TANK TRAILER
N-2251 — Tank Trailers / Food Grade Trailers - Insulated
2022 WALKER 6500 GALLON SINGLE COMPARTMENT 2-AXLE INSULATED STAINLESS STEEL FOOD GRADE SEMI TANK TRAILER
3A Sanitary Spec, 6500 Gallon, Single Compartment, Straight Round Stainless Steel Clean Bore Construction, 2 Ball Floor Mounted C.I.P., Full Aluminum Frame & Cradle, 3” Urethane Insulation w/ 225° Rating, 3" Pod Style Outlet w/ Dust Cover, 19" Sanitary Manhole w/ Stainless Steel Dust Cover, L/H & R/H Stainless Steel Ladders, Aluminum Fenders, Hendrickson Intraax Air Ride Suspension, Meritor Wabco 4S-2M ABS w/ Roll Stability System, 11R22.5 Tires on All Aluminum Wheels, Cam Brakes, Jost A400 Crank Landing Gear w/ 10” Sand Shoe......Tank Specs: Head Material 11 gauge 304 SS, Shell Material 12 gauge 304 SS , Inner Shell Finish #4 Finish, Inner Weld Finish W5 Finish, 22 Gauge Bright Annealed Stainless Steel Wrap, 18 Gauge Blown Heads #3 Finish, Max Product Density 9 lbs. per Gallon, Atmospheric Operating Pressure, 200° Max Loading Temp…
Price: Call
Specs and price subject to change… -
2022 WALKER 6500 GAL., 1 COMPT., 2-AXLE INSULATED STAINLESS STEEL FOOD GRADE SEMI TANK TRAILER
N-2250 — Tank Trailers / Food Grade Trailers - Insulated
2022 WALKER 6500 GALLON SINGLE COMPARTMENT 2-AXLE INSULATED STAINLESS STEEL FOOD GRADE SEMI TANK TRAILER
3A Sanitary Spec, 6500 Gallon, Single Compartment, Straight Round Stainless Steel Clean Bore Construction, 2 Ball Floor Mounted C.I.P., Full Aluminum Frame & Cradle, 3” Urethane Insulation w/ 225° Rating, 3" Pod Style Outlet w/ Dust Cover, 19" Sanitary Manhole w/ Stainless Steel Dust Cover, L/H & R/H Stainless Steel Ladders, Aluminum Fenders, Hendrickson Intraax Air Ride Suspension, Meritor Wabco 4S-2M ABS w/ Roll Stability System, 11R22.5 Tires on All Aluminum Wheels, Cam Brakes, Jost A400 Crank Landing Gear w/ 10” Sand Shoe......Tank Specs: Head Material 11 gauge 304 SS, Shell Material 12 gauge 304 SS , Inner Shell Finish #4 Finish, Inner Weld Finish W5 Finish, 22 Gauge Bright Annealed Stainless Steel Wrap, 18 Gauge Blown Heads #3 Finish, Max Product Density 9 lbs. per Gallon, Atmospheric Operating Pressure, 200° Max Loading Temp…
Price: Call
Specs and price subject to change… -
2022 BULK 5,600 GAL. 1 COMPT. 2-AXLE X-RING SEMI TANK TRAILER
N-2343 — Tank Trailers / External Ring - Non-Code
2022 BULK 5600 GALLON SINGLE COMPARTMENT 2-AXLE X-RING SEMI TANK TRAILER
NON-SPEC, 5600 gallon, single compartment with (2) 10 gauge T304LSS-2B finish baffles, 30” drop/double conical/equal split, SS channel circumferential stiffing rings, stainless sub-frame material, 13# max. product, 150# max. product temp., 10 gauge stainless T304SS-2B finish head material, 12 gauge T304SS-2B finish shell material, 20” full opening manhole with SS spilldam around manhole & (2) 1-½” drain hoses, (2) 3” cleanouts in top of tank shell, (1) 4” x 4” x 90 degree SS elbow connected to spool piece extending to curbside, (1) 4” Betts WD400ALB butterfly valve with SS adapter & dust cap, (1) Betts # 6460463SSV pressure/vacuum vent located on manhole cover, curbside stainless ladder, 8” x 21’ hose tube with doors on each end mounted on curbside (no hoses), front & rear aluminum contour fenders with SS braces, Jost 2 speed landing gear, Hendrickson Intraax air ride suspension, Meritor RRS roll stability and ABS brakes, 10-hole hub piloted 22.5 aluminum wheels, 11R22.5 tires, black undercarriage paint…….
Price: Call
Specs and price subject to change… -
2022 BULK 5000 GAL., 1-COMPT., 2-AXLE STAINLESS STEEL EXTERNAL RING SEMI TANK TRAILER
N-2455 — Tank Trailers / External Ring - Code
2022 BULK 5000 GALLON SINGLE COMPARTMENT 2-AXLE STAINLESS STEEL EXTERNAL RING SEMI TANK TRAILER
DOT407SS, 5000 gallon, single compartment, straight round construction, stainless sub-frame material, 16# max. product, 150 degree max. product temp., 10 gauge SS 2-1/4” high channel rings, 180” manuf. T316LSS-2B finish head & shell material, 3” Girard DOT-3X407AF-2 pressure relief vent, 4”x 3”x 90 degree SS Betts CH46955SST external chemical hydraulic operated valve pointed to rear, Betts hydraulic pump located at rear roadside running gear frame rail, 3” SS Betts #SSG1013 gate valve with flanged outlet…pointed to rear, curbside stainless ladder, 6” x 8” x 21 SS hose trough with drain on curbside (no hoses), front & rear aluminum contour fenders, Jost 2 speed landing gear, Hendrickson Intraax air ride suspension, Meritor Wabco RRS Plus roll stability and ABS brakes, 11R22.5 tires on 10-hole hub piloted 22.5 aluminum wheels, black undercarriage paint…… File Photos...
Price: Call
Specs and price subject to change… -
2022 BULK 5000 GAL., 1-COMPT., 2-AXLE STAINLESS STEEL EXTERNAL RING SEMI TANK TRAILER
N-2456 — Tank Trailers / External Ring - Code
2022 BULK 5000 GALLON SINGLE COMPARTMENT 2-AXLE STAINLESS STEEL EXTERNAL RING SEMI TANK TRAILER
DOT407SS, 5000 gallon, single compartment, straight round construction, stainless sub-frame material, 16# max. product, 150 degree max. product temp., 10 gauge SS 2-1/4” high channel rings, 180” manuf. T316LSS-2B finish head & shell material, 3” Girard DOT-3X407AF-2 pressure relief vent, 4”x 3”x 90 degree SS Betts CH46955SST external chemical hydraulic operated valve pointed to rear, Betts hydraulic pump located at rear roadside running gear frame rail, 3” SS Betts #SSG1013 gate valve with flanged outlet…pointed to rear, curbside stainless ladder, 6” x 8” x 21 SS hose trough with drain on curbside (no hoses), front & rear aluminum contour fenders, Jost 2 speed landing gear, Hendrickson Intraax air ride suspension, Meritor Wabco RRS Plus roll stability and ABS brakes, 11R22.5 tires on 10-hole hub piloted 22.5 aluminum wheels, black undercarriage paint…… File Photos...
Price: Call
Specs and price subject to change… -
2022 BULK 7,000 GAL. 1 COMPT. 2-AXLE INSULATED STAINLESS STEEL SEMI TANK TRAILER
N-2186 — Tank Trailers / Insulated Trailers - Code
2022 BULK 7000 GALLON SINGLE COMPARTMENT 2-AXLE INSULATED STAINLESS STEEL SEMI TANK TRAILER
DOT407SS, 7000 gallon, single compartment, straight round construction, stainless sub-frame material, 13# max. product, 250 degree max. product temp., head & shell 10 gauge stainless T316LSS-2B finish, 6” fiberglass compressed to 5”, 22 gauge BA/SS stainless jacket, (3) full length steam & in-transit heat channels, 3” Girard DOT-3X407T pressure relief valve, 3” Girard 3X407MVBTT magnetic vacuum relief breaker, 4” stainless steel hydraulically operated emergency valve, 3” stainless outlet valve pointed to rear (hydraulic pump located at rear roadside running gear frame rail), 0-300 degree F thermometer, curbside stainless ladder, 8” x 21’ hose tube with doors mounted each side ( no hoses ), front & rear aluminum contour fenders, Jost 2 speed landing gear, Hendrickson Intraax air ride suspension, Meritor Wabco RRS Plus roll stability and ABS brakes, 11R22.5 tires on 10-hole hub piloted 22.5 aluminum wheels, black undercarriage paint…….
Price: Call
Specs and price subject to change… -
2022 BEALL 550 CF. 1-AXLE SEMI AND 550 CF. 2-AXLE PULL TRAILER
N-2367-2368 — Pneumatic Trailers / Doubles
1-AXLE SEMI TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side rear, Terminate with 4" female coupler and plug, 3" Harco silencer installed downstream of street-side air inlet, (2) ribbed aluminum fenders over rear axle, (1) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, Jost two-speed with sand shoes, pintle hitch at rear…
2-AXLE PULL TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side front, Terminate with 4" female coupler and plug, Big ring turn table, (4) ribbed aluminum fenders, (2) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, 2” X 4” X 1/8” rectangular steel tubing with steel mesh walkway, (2) double bushed hinge assemblies, (1) premier shock housing with hardened eye, (1) single step located street-side rear…
Price: Call
Specs and price subject to change… -
2022 BEALL 550 CF. 1-AXLE SEMI AND 550 CF. 2-AXLE PULL TRAILER
N-2401-2402 — Pneumatic Trailers / Doubles
1-AXLE SEMI TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side rear, Terminate with 4" female coupler and plug, 3" Harco silencer installed downstream of street-side air inlet, (2) ribbed aluminum fenders over rear axle, (1) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, Jost two-speed with sand shoes, pintle hitch at rear…
2-AXLE PULL TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side front, Terminate with 4" female coupler and plug, Big ring turn table, (4) ribbed aluminum fenders, (2) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, 2” X 4” X 1/8” rectangular steel tubing with steel mesh walkway, (2) double bushed hinge assemblies, (1) premier shock housing with hardened eye, (1) single step located street-side rear…
Price: Call
Specs and price subject to change… -
2022 BEALL 550 CF. 1-AXLE SEMI AND 550 CF. 2-AXLE PULL TRAILER
N-2399-2400 — Pneumatic Trailers / Doubles
1-AXLE SEMI TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side rear, Terminate with 4" female coupler and plug, 3" Harco silencer installed downstream of street-side air inlet, (2) ribbed aluminum fenders over rear axle, (1) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, Jost two-speed with sand shoes, pintle hitch at rear…
2-AXLE PULL TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side front, Terminate with 4" female coupler and plug, Big ring turn table, (4) ribbed aluminum fenders, (2) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, 2” X 4” X 1/8” rectangular steel tubing with steel mesh walkway, (2) double bushed hinge assemblies, (1) premier shock housing with hardened eye, (1) single step located street-side rear…
Price: Call
Specs and price subject to change… -
2022 BEALL 550 CF. 1-AXLE SEMI AND 550 CF. 2-AXLE PULL TRAILER
N-2397-2398 — Pneumatic Trailers / Doubles
1-AXLE SEMI TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side rear, Terminate with 4" female coupler and plug, 3" Harco silencer installed downstream of street-side air inlet, (2) ribbed aluminum fenders over rear axle, (1) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, Jost two-speed with sand shoes, pintle hitch at rear…
2-AXLE PULL TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side front, Terminate with 4" female coupler and plug, Big ring turn table, (4) ribbed aluminum fenders, (2) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, 2” X 4” X 1/8” rectangular steel tubing with steel mesh walkway, (2) double bushed hinge assemblies, (1) premier shock housing with hardened eye, (1) single step located street-side rear…
Price: Call
Specs and price subject to change… -
2022 BEALL 550 CF. 1-AXLE SEMI AND 550 CF. 2-AXLE PULL TRAILER
N-2403-2404 — Pneumatic Trailers / Doubles
1-AXLE SEMI TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side rear, Terminate with 4" female coupler and plug, 3" Harco silencer installed downstream of street-side air inlet, (2) ribbed aluminum fenders over rear axle, (1) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, Jost two-speed with sand shoes, pintle hitch at rear…
2-AXLE PULL TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side front, Terminate with 4" female coupler and plug, Big ring turn table, (4) ribbed aluminum fenders, (2) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, 2” X 4” X 1/8” rectangular steel tubing with steel mesh walkway, (2) double bushed hinge assemblies, (1) premier shock housing with hardened eye, (1) single step located street-side rear…
Price: Call
Specs and price subject to change… -
2022 BEALL 9,500 GAL. 4 COMPT. 2-AXLE SEMI TANK TRAILER
N-2372 — Petroleum Tank Trailers / Semi Trailers
2022 BEALL 9500 GALLON 4-COMPARTMENT 2-AXLE ALUMINUM SEMI TANK TRAILER
DOT406AL, 9500 gallons shell full, 4 compt. ( 4100-2100-1100-2200 ), double bulkheads, frameless double conical aluminum construction, polished rear head, 4” Betts air operated internal valves, Bayco 4” load / unload API valve on each comp't with in-line site glass, brake interlock bar covering bottom loading heads and both vapor recovery outlets, Bayco Flo-Tech 5 wire system with no control module, Optic socket, (4) hose tube cluster with 2- 6” tubes( polished ) and 2- 7” tubes located curbside rear with front openings, 1 ½” X 14’ stick tube, aluminum ladder at front, catwalk drains thru ladder uprights, aluminum fenders front & rear, 48”L x 30”H x 24”D- shell mounted aluminum fitting box installed curbside, 2 speed landing gear with sand shoes, Hendrickson air ride suspension with dump valve, Meritor Wabco ABS brakes with Roll Stability System, Alcoa 8.25 X 22.5 aluminum wheels, 275/80R22.5 radial tires, polished aluminum DOT rear bumper………….
Price: Call
Specs and price subject to change… -
2022 BEALL 9,500 GAL. 4 COMPT. 2-AXLE SEMI TANK TRAILER
N-2371 — Petroleum Tank Trailers / Semi Trailers
2022 BEALL 9500 GALLON 4-COMPARTMENT 2-AXLE ALUMINUM SEMI TANK TRAILER
DOT406AL, 9500 gallons shell full, 4 compt. ( 4100-2100-1100-2200 ), double bulkheads, frameless double conical aluminum construction, polished rear head, 4” Betts air operated internal valves, Bayco 4” load / unload API valve on each comp't with in-line site glass, brake interlock bar covering bottom loading heads and both vapor recovery outlets, Bayco Flo-Tech 5 wire system with no control module, Optic socket, (4) hose tube cluster with 2- 6” tubes( polished ) and 2- 7” tubes located curbside rear with front openings, 1 ½” X 14’ stick tube, aluminum ladder at front, catwalk drains thru ladder uprights, aluminum fenders front & rear, 48”L x 30”H x 24”D- shell mounted aluminum fitting box installed curbside, 2 speed landing gear with sand shoes, Hendrickson air ride suspension with dump valve, Meritor Wabco ABS brakes with Roll Stability System, Alcoa 8.25 X 22.5 aluminum wheels, 275/80R22.5 radial tires, polished aluminum DOT rear bumper………….
Price: Call
Specs and price subject to change… -
2022 BEALL 9,500 GAL. 4 COMPT. 2-AXLE SEMI TANK TRAILER
N-2393 — Petroleum Tank Trailers / Semi Trailers
2022 BEALL 9500 GALLON 4-COMPARTMENT 2-AXLE ALUMINUM SEMI TANK TRAILER
DOT406AL, 9500 gallons shell full, 4 compt. ( 4100-2100-1100-2200 ), double bulkheads, frameless double conical aluminum construction, polished rear head, 4” Betts air operated internal valves, Bayco 4” API Y- branch with Bayco dust cap, site glass on each curbside discharge valve, Street side gravity drops with 4” butterfly valves, brake interlock bar covering bottom loading heads and both vapor recovery outlets, street side vapor recovery with 3” male adapter and cap, Bayco Flo-Tech 5 wire system with no control module, Optic socket, (4) hose tube cluster with 2- 6” tubes( polished ) and 2- 7” tubes located curbside rear with front openings, 1 ½” X 14’ stick tube, aluminum ladder at front, catwalk drains thru ladder uprights, aluminum fenders front & rear, 48”L x 30”H x 24”D- shell mounted aluminum fitting box installed curbside, 2 speed landing gear with sand shoes, Hendrickson air ride suspension with dump valve, Meritor Wabco ABS brakes with Roll Stability System, Alcoa 8.25 X 22.5 aluminum wheels, 275/80R22.5 radial tires, polished aluminum DOT rear bumper……
Price: Call
Specs and price subject to change… -
2022 BEALL 550 CF. 1-AXLE SEMI AND 550 CF. 2-AXLE PULL TRAILER
N-2363-2364 — Pneumatic Trailers / Doubles
1-AXLE SEMI TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side rear, Terminate with 4" female coupler and plug, 3" Harco silencer installed downstream of street-side air inlet, (2) ribbed aluminum fenders over rear axle, (1) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, Jost two-speed with sand shoes, pintle hitch at rear…
2-AXLE PULL TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side front, Terminate with 4" female coupler and plug, Big ring turn table, (4) ribbed aluminum fenders, (2) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, 2” X 4” X 1/8” rectangular steel tubing with steel mesh walkway, (2) double bushed hinge assemblies, (1) premier shock housing with hardened eye, (1) single step located street-side rear…
Price: Call
Specs and price subject to change… -
2022 BEALL 550 CF. 1-AXLE SEMI AND 550 CF. 2-AXLE PULL TRAILER
N-2365-2366 — Pneumatic Trailers / Doubles
1-AXLE SEMI TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side rear, Terminate with 4" female coupler and plug, 3" Harco silencer installed downstream of street-side air inlet, (2) ribbed aluminum fenders over rear axle, (1) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, Jost two-speed with sand shoes, pintle hitch at rear…
2-AXLE PULL TANK TRAILER
550 cubic feet capacity, all aluminum construction, Beall fabric aeration with 2" ball valve control and (1) 2" check valve (no top air), 5" x 4" aluminum discharge y-branch with 5" butterfly valve, angled 45 degrees to street-side front, Terminate with 4" female coupler and plug, Big ring turn table, (4) ribbed aluminum fenders, (2) Hendrickson Intraax AANT 23,000# RTR assemblies, Michelin X-Line Energy 11R22.5 tires on 10 stud hub pilot Alcoa aluminum wheels, Hendrickson Tiremaax CP inflation system, 2” X 4” X 1/8” rectangular steel tubing with steel mesh walkway, (2) double bushed hinge assemblies, (1) premier shock housing with hardened eye, (1) single step located street-side rear…
Price: Call
Specs and price subject to change… -
2022 BEALL 9,500 GAL. 4 COMPT. 2-AXLE SEMI TANK TRAILER
N-2373 — Petroleum Tank Trailers / Semi Trailers
2022 BEALL 9500 GALLON 4-COMPARTMENT 2-AXLE ALUMINUM SEMI TANK TRAILER
DOT406AL, 9500 gallons shell full, 4 compt. ( 4100-2100-1100-2200 ), double bulkheads, frameless double conical aluminum construction, polished rear head, 4” Betts air operated internal valves, Bayco 4” API Y- branch with Bayco dust cap, site glass on each curbside discharge valve, Street side gravity drops with 4” butterfly valves, brake interlock bar covering bottom loading heads and both vapor recovery outlets, street side vapor recovery with 3” male adapter and cap, Bayco Flo-Tech 5 wire system with no control module, Optic socket, (4) hose tube cluster with 2- 6” tubes( polished ) and 2- 7” tubes located curbside rear with front openings, 1 ½” X 14’ stick tube, aluminum ladder at front, catwalk drains thru ladder uprights, aluminum fenders front & rear, 48”L x 30”H x 24”D- shell mounted aluminum fitting box installed curbside, 2 speed landing gear with sand shoes, Hendrickson air ride suspension with dump valve, Hendrickson MAXX22T air disc brakes, Alcoa 8.25 X 22.5 aluminum wheels, 275/80R22.5 radial tires, polished aluminum DOT rear bumper……
Price: Call
Specs and price subject to change… -
2022 BRENNER 7000 GAL., 1-COMPT., 2-AXLE INSULATED STAINLESS STEEL SEMI TANK TRAILER
N-2334 — Tank Trailers / Insulated Trailers - Code
2022 BRENNER 7000 GALLON SINGLE COMPARTMENT 2-AXLE INSULATED STAINLESS STEEL SEMI TANK TRAILER
DOT407, 7000 gallon, single compartment, double conical construction 50/50 split, stainless sub-frame material, 13# max. product, 250# max. product temp., head & shell 10 gauge stainless T316LSS-2B finish, 6” fiberglass compressed to 5”, 22 gauge BA/SS stainless jacket, (3) full length steam & in-transit heat channels, 0-300 degree F thermometer, 3” Girard DOT-3X407T pressure relief valve, 3” Girard 3X407MVBTT magnetic vacuum relief breaker, 4” SS Betts CH47003SST internal chemical hydraulic operated valve, 3” SS Betts QR713SST QRB hydrolet valve with 90 degree threaded outlet pointed to curbside, hydraulic valve operator located on curbside landing leg frame, curbside stainless ladder, 8” x 21’ aluminum hose tube with doors mounted each side ( no hoses ), front & rear aluminum contour fenders, Jost 2 speed landing gear, Hendrickson Intraax air ride suspension, Wabco RRS roll stability and ABS brakes, 10-hole hub piloted 22.5 aluminum wheels, 11R22.5 tires, black undercarriage paint…….
Price: Call
Specs and price subject to change… -
2022 BRENNER 7000 GAL., 1-COMPT., 2-AXLE INSULATED STAINLESS STEEL SEMI TANK TRAILER
N-2333 — Tank Trailers / Insulated Trailers - Code
2022 BRENNER 7000 GALLON SINGLE COMPARTMENT 2-AXLE INSULATED STAINLESS STEEL SEMI TANK TRAILER
DOT407, 7000 gallon, single compartment, double conical construction 50/50 split, stainless sub-frame material, 13# max. product, 250# max. product temp., head & shell 10 gauge stainless T316LSS-2B finish, 6” fiberglass compressed to 5”, 22 gauge BA/SS stainless jacket, (3) full length steam & in-transit heat channels, 0-300 degree F thermometer, 3” Girard DOT-3X407T pressure relief valve, 3” Girard 3X407MVBTT magnetic vacuum relief breaker, 4” SS Betts CH47003SST internal chemical hydraulic operated valve, 3” SS Betts QR713SST QRB hydrolet valve with 90 degree threaded outlet pointed to curbside, hydraulic valve operator located on curbside landing leg frame, curbside stainless ladder, 8” x 21’ aluminum hose tube with doors mounted each side ( no hoses ), front & rear aluminum contour fenders, Jost 2 speed landing gear, Hendrickson Intraax air ride suspension, Wabco RRS roll stability and ABS brakes, 10-hole hub piloted 22.5 aluminum wheels, 11R22.5 tires, black undercarriage paint…….
Price: Call
Specs and price subject to change… -
2022 BRENNER 7000 GAL., 1-COMPT., 2-AXLE INSULATED STAINLESS STEEL SEMI TANK TRAILER
N-2184 — Tank Trailers / Insulated Trailers - Code
2022 BRENNER 7000 GALLON SINGLE COMPARTMENT 2-AXLE INSULATED STAINLESS STEEL SEMI TANK TRAILER
DOT407, 7000 gallon, single compartment, double conical construction 50/50 split, stainless sub-frame material, 13# max. product, 250# max. product temp., head & shell 10 gauge stainless T316LSS-2B finish, 6” fiberglass compressed to 5”, 22 gauge BA/SS stainless jacket, (3) full length steam & in-transit heat channels, 0-300 degree F thermometer, 3” Girard DOT-3X407T pressure relief valve, 3” Girard 3X407MVBTT magnetic vacuum relief breaker, 4” SS Betts CH47003SST internal chemical hydraulic operated valve, 3” SS Betts QR713SST QRB hydrolet valve with 90 degree threaded outlet pointed to curbside, hydraulic valve operator located on curbside landing leg frame, curbside stainless ladder, 8” x 21’ aluminum hose tube with doors mounted each side ( no hoses ), front & rear aluminum contour fenders, Jost 2 speed landing gear, Hendrickson Intraax air ride suspension, Wabco RRS roll stability and ABS brakes, 10-hole hub piloted 22.5 aluminum wheels, 11R22.5 tires, black undercarriage paint…….
Price: Call
Specs and price subject to change… -
2022 BEALL 579 4500 GAL. 3-AXLE TANK TRUCK AND 2022 BEALL 5500 GAL., 3-COMPT., 2-AXLE ALUMINUM PULL TANK TRAILER
N-2353-2354 — Tank Trucks / Truck & Trailer
2022 PETERBILT 579 3-AXLE/2022 BEALL 4500 GALLON SINGLE COMPARTMENT ALUMINUM TRUCK TANK
DOT406AL, 4500 gallon, single compt., polished rear head, 4” Betts air operated internal valve, Bayco 4” bottom load API valve on “Y” branch with brake interlock, curbside and streetside vapor and discharge piping, Bayco Flo-Tech 5 wire system with no control module, Optic socket, sight glass on gravity drop, vapor recovery, stacked 7” & 6” polished aluminum hose tubes with fitting box at end mounted curb side, 1½ “X 14’ polished aluminum stick tube, Beall “Hook” style bucket holder, rear aluminum ladder at rear with non-slip steps, catwalk drains thru ladder uprights, Amerex 20# PURPLE-K fire extinguisher, DOT rear bumper, (2) smooth aluminum full tandem double radius fenders with Beall logo mudflaps…
2022 BEALL 5500 GAL., 3-CPT., 2-AXLE ALUMINUM PULL TANK TRAILER
DOT406AL, 5500 gallon, 3 compt. (2200-1100-2200), double bulkheads, 8” drop to center double conical construction, polished rear head, 4” Betts air operated internal valves, Bayco 4” bottom load API valve on “Y” branch with brake interlock, curbside and streetside vapor and discharge piping, Bayco Flo-Tech 5 wire system with no control module, Optic socket, sight glass on gravity drops, vapor recovery, stacked 7” & 6” polished aluminum hose tubes with fitting box at end mounted curb side, big ring turn table, draw bar with steel mesh walkway and jack stand, Hendrickson air ride suspension, Meritor Wabco ABS brakes with Roll Stability System, Alcoa 8.25 X 22.5 aluminum wheels, Michelin XTE 275/80R22.5 tires, (2) Hogebilt front quarter fenders, (2) smooth aluminum single axle full radius fenders with Beall logo mudflaps…
Price: Call
Specs and price subject to change… -
2021 VALOR 42T 2-AXLE TILT DECK TRAILER
GVWR: 52,000 lbs. Capacity (Distributed): 41,940 lbs. Base Trailer Weight: 10,060 lbs. Frame Construction: Tubular subframe with high tensile strength perimeter rails Crossmembers: 5” Tubular crossmembers on 12” and 16” centers Hitch: 3” ID Lunette Eye. 9,000 lb. capacity, adjustable height Landing Gear: 35,000 lb. capacity with drop foot Safety Chains: (2) 1/2”X 36” Grade 70 high tensile strength with slip hooks and safety latches Deck Latch: Over-center type with tension adjuster, lever and safety pin Cushion Cylinder: 4”X16” with internal metered flow to cushion loading and unloading Load Securement: 14 each (7 per side) 2-way chain slot/stake pocket system 10 each (5 per side) 1" diameter rings Tool Compartment: Combination open tool try and lockable toolbox Axles: Qty: (2) 25,000 lb. capacity Hubs: 8 on 275mm bolt circle with M22 lug nuts Brakes: 16-1/2" x 7" s-cam full air brakes with maxi spring brakes on both axles, automatic slack adjusters, equipped with 2S/2M ABS Suspension: Tandem axle with fabricated hangers and axle alignment capability Wheels: 22.5” X 6.75” Uni-mount 8 on 275mm bolt pattern Tires: 255/70R 22.5 Radial Load Range H Finish Preparation: Sandblast Finish Coating: Powder Coat with Zinc primer Electrical: Phillips sealed harness system with rubber isolated LED lighting Decking: 2” Rough surface No. 1 grade Fir with fasteners at all crossmembers Deck Width: 102"
SALES PRICE DOES NOT INCLUDE FET, INBOUND FREIGHT, SALES TAX OR LICENSING/REGISTRATION FEES.....
Price: Call
Specs and price subject to change… -
2021 VALOR 40T 2-AXLE TILT DECK TRAILER
GVWR: 52,000 lbs. Capacity: (Distributed) 41,620 lbs. Base Trailer Weight: 10,380 lbs. Frame Construction: Tubular subframe with high tensile strength perimeter rails Crossmembers: 5” Tubular crossmembers on 12” and 16” centers Hitch: 3” ID Lunette Eye. 9,000 lb. capacity, adjustable height Landing Gear: 35,000 lb. capacity with drop foot Safety Chains: (2) 1/2”X 36” Grade 70 high tensile strength with slip hooks and safety latches Deck Latch: Over-center type with tension adjuster, lever and safety pin Cushion Cylinder: 4”X16” with internal metered flow to cushion loading and unloading Load Securement: 14 each (7 per side) 2-way chain slot/stake pocket system 10 each (5 per side) 1" diameter rings Tool Compartment: Combination open tool try and lockable toolbox Axles: Qty: (2) 25,000 lb. capacity Hubs: 8 on 275mm bolt circle with M22 lug nuts Brakes: 12-1/4" x 7-1/2" s-cam full air brakes with maxi spring brakes on both axles, automatic slack adjusters, equipped with 2S/2M ABS Suspension: Tandem axle with fabricated hangers and axle alignment capability Wheels: 17.5” X 6.75” Uni-mount 8 on 275mm bolt pattern Tires: 215/75R 17.5 Radial Load Range H Finish Preparation: Sandblast Finish Coating: Powder Coat with Zinc primer Electrical: Phillips sealed harness system with rubber isolated LED lighting Decking: 2” Rough surface No. 1 grade Fir with fasteners at all crossmembers Deck Width: 102"
SALES PRICE DOES NOT INCLUDE FET, INBOUND FREIGHT, SALES TAX OR LICENSING/REGISTRATION FEES.....
Price: Call
Specs and price subject to change… -
2021 BULK 5,600 GAL. 1 COMPT. 2-AXLE X-RING SEMI TANK TRAILER
N-2021 — Tank Trailers / External Ring - Non-Code
2021 BULK 5600 GALLON SINGLE COMPARTMENT 2-AXLE X-RING SEMI TANK TRAILER
NON-SPEC, 5600 gallon, single compartment with (2) 10 gauge T304LSS-2B finish baffles, 30” drop/double conical/equal split, SS channel circumferential stiffing rings, stainless sub-frame material, 13# max. product, 150# max. product temp., 10 gauge stainless T304SS-2B finish head material, 12 gauge T304SS-2B finish shell material, 20” full opening manhole with SS spilldam around manhole & (2) 1-½” drain hoses, (2) 3” cleanouts in top of tank shell, (1) 4” x 4” x 90 degree SS elbow connected to spool piece extending to curbside, (1) 4” Betts WD400ALB butterfly valve with SS adapter & dust cap, (1) Betts # 6460463SSV pressure/vacuum vent located on manhole cover, curbside stainless ladder, 8” x 21’ hose tube with doors on each end mounted on curbside (no hoses), front & rear aluminum contour fenders with SS braces, Jost 2 speed landing gear, Hendrickson Intraax air ride suspension, Hendrickson TIREMAAX PRO tire inflation system, Meritor RRS roll stability and ABS brakes, 10-hole hub piloted 22.5 aluminum wheels, 11R22.5 tires, black undercarriage paint…….
Price: Call
Specs and price subject to change… -
2021 VALOR 16TUS UTILITY TRAILER W/ 5 FT. STATIONARY DECK
GVWR: 18,970 lbs. Capacity (Distributed): 14,820 lbs. Base Trailer Weight: 4,180 lbs. Frame Construction: Tubular Subframe and Deck Rails Crossmembers: 3x1.5" Tubular Crossmembers on 16" Center Landing Gear: 12,000 lb. Capacity with Top Wind Drop Leg Jack Safety Chains: 2 each 3/8" x 36" Grade 70 high test cadmium plated with slip hooks and safety latches Deck Latch: Over-center type with tension adjustment and spring loaded safety Cushion Cylinder: 3" x 8" 2500 PSI Tie-Rod Cylinder with Piston Load Securement: 12 Total (6 per side) 1" D-ring type, 12 Total (6 per side) stake pocket Tool Compartment: Chain tray and lockable toolbox Axles: 2 each 8,000 lb. capacity Hubs: 8 on 6.5 bolt circle with 5/8" cone type lug nuts Brakes: 12-1/4" x 3 3/8" electric brakes both axles with 12 volt sealed breakaway system Suspension: Rubber torsion Wheels: 16" x 6.75" 8 on 6.5" Bolt Pattern Tires: 235/85R16 radial load range H Finish Preparation: Media Blast Finish Coating: Powder Coat (White), Colors Optional Electrical: Phillips Industries STA-DRY SLIM-7 SYSTEM, Rubber Light Grommets and LED Lighting Decking: 2" Rough surface No. 1 Grade Fir w/ fasteners at all cross members Decking Width: 83” width between fenders
*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE BASED ON CONTINUOUS IMPROVEMENTS
Price: Call
Specs and price subject to change… -
2021 VALOR 40TS 2-AXLE TILT DECK TRAILER W/ 6 FT. STATIONARY DECK
GVWR: 52,000 lbs. Capacity: (Distributed) 40,880bs. Base Trailer Weight: 11,120 lbs. Frame Construction: Tubular subframe with high tensile strength perimeter rails Crossmembers: 5” Tubular crossmembers on 12” and 16” centers Hitch: 3” ID Lunette Eye. 9,000 lb. capacity, adjustable height Landing Gear: 35,000 lb. capacity with drop foot Safety Chains: (2) 1/2”X 36” Grade 70 high tensile strength with slip hooks and safety latches Deck Latch: Over-center type with tension adjuster, lever and safety pin Cushion Cylinder: 4”X16” with internal metered flow to cushion loading and unloading Load Securement: 18 each (9 per side) 2-way chain slot/stake pocket system 14 each (7 per side) 1" diameter rings Tool Compartment: Combination open tool try and lockable toolbox Axles: Qty: (2) 25,000 lb. capacity Hubs: 8 on 275mm bolt circle with M22 lug nuts Brakes: 12-1/4" x 7-1/2" s-cam full air brakes with maxi spring brakes on both axles, automatic slack adjusters, equipped with 2S/2M ABS Suspension: Tandem axle with fabricated hangers and axle alignment capability Wheels: 17.5” X 6.75” Uni-mount 8 on 275mm bolt pattern Tires: 215/75R 17.5 Radial Load Range H Finish Preparation: Sandblast Finish Coating: Powder Coat with Zinc primer Electrical: Phillips sealed harness system with rubber isolated LED lighting Decking: 2” Rough surface No. 1 grade Fir with fasteners at all crossmembers Deck Width: 102"
SALES PRICE DOES NOT INCLUDE FET, INBOUND FREIGHT, SALES TAX OR LICENSING/REGISTRATION FEES.....
Price: Call
Specs and price subject to change… -
2021 T & B WATER TRUCKS 4,000 GALLON BODY MOUNT WATER TANK W/ CDF OPTIONS
P-58 — Tank Trucks / Tank Bodies
4,000 GALLON BODY MOUNT WATER TANK W/ CDF OPTIONS
4000 Gal approx. Tank made from A-36 3/16" steel with dished & flanged heads. 4x3 Pump, 800 gpm, With Mounting Bracket mechanical seal. Expansion Chamber with required Threaded & grooved Nipples. Tank Mounting Brackets and Bolts and 3000 PSI Springs. 12' section of High Pressure Hose w/ 2" - 3" KC Nipples w/Bands. 4" Downpipe including 4" 90' & Hose, Bands screen & anti vortex cover plate, Air Control Panel w/Air Lines & Fittings, Front Spray Bar with ram horns, U Bolts & Mounting Brackets, Rear Spray Bar with ram horns, U Bolts & Mounting Brackets, Side Spray assembly including double grooved 90*, Complete DOT Light Mounting Kit w/Brackets & Light Tube Assembly, (4) 3" Aluminum Adjustable Fan Sprays, length of 3" pipe same length as tank tacked to subframe, tank to be sanded and sprayed with 1 coat of shipping primer. Our subframes are a complete 3" x 8" rectangular tube 1/4" thick mounted to a Doubler plate between subframe and tank skin. Options Included: longitudnal baffle all 3 compartments 1/2 way up tank, self loading capability w/ necc. Valves and primer pump, 1- 1 1/2" and 2- 2 1/2" outlets with brass adaptors and chains 4" outlet rear head, hose reel w bracket and fog nozzle. 50' of 1 1/2" hose and connections.
Price: Call
Specs and price subject to change… -
2021 T & B WATER TRUCKS 4,000 GALLON BODY MOUNT WATER TANK W/ CDF OPTIONS
P-57 — Tank Trucks / Tank Bodies
4,000 GALLON BODY MOUNT WATER TANK W/ CDF OPTIONS
4000 Gal approx. Tank made from A-36 3/16" steel with dished & flanged heads. 4x3 Pump, 800 gpm, With Mounting Bracket mechanical seal. Expansion Chamber with required Threaded & grooved Nipples. Tank Mounting Brackets and Bolts and 3000 PSI Springs. 12' section of High Pressure Hose w/ 2" - 3" KC Nipples w/Bands. 4" Downpipe including 4" 90' & Hose, Bands screen & anti vortex cover plate, Air Control Panel w/Air Lines & Fittings, Front Spray Bar with ram horns, U Bolts & Mounting Brackets, Rear Spray Bar with ram horns, U Bolts & Mounting Brackets, Side Spray assembly including double grooved 90*, Complete DOT Light Mounting Kit w/Brackets & Light Tube Assembly, (4) 3" Aluminum Adjustable Fan Sprays, length of 3" pipe same length as tank tacked to subframe, tank to be sanded and sprayed with 1 coat of shipping primer. Our subframes are a complete 3" x 8" rectangular tube 1/4" thick mounted to a Doubler plate between subframe and tank skin. Options Included: longitudnal baffle all 3 compartments 1/2 way up tank, self loading capability w/ necc. Valves and primer pump, 1- 1 1/2" and 2- 2 1/2" outlets with brass adaptors and chains 4" outlet rear head, hose reel w bracket and fog nozzle. 50' of 1 1/2" hose and connections.
Price: Call
Specs and price subject to change… -
2021 VALOR 12T 2-AXLE TILT DECK TRAILER
GVWR: 16,800 lbs. Capacity (Distributed): 11,640 lbs. Base Trailer Weight: 5,160 lbs. Frame Construction: 6 x 4" Tubular Subframe with Perimeter Rails Crossmembers: 3 x 2" Tubular Crossmembers on 16" Centers Hitch: 2-5/16" Coupler standard or optional Lunette eye, adjustable height Landing Gear: 12,000 lb Capacity with Drop Foot Safety Chains: (2) 3/8" x 36" Grade 70 High Tensile Strength with Slip Hooks and Safety Latches Deck Latch: Over-center Type with Tension Adjuster and Safety Pin Cushion Cylinder: 3" x 12" with Internal Metered Flow to Cushion Loading and Unloading Load Securement: 10 each (5 per side) 2-way Chain Slot/Stake Pocket System Tool Compartment: Combination open tool tray & lockable toolbox Axles: (2) - 7,000 lbs Capacity Hubs: 8 on 6.5 Bolt Circle 5/8" Cone Lug Nuts Brakes: 12" x 2" Electric Brakes both Axles with 12 Volt Sealed Breakaway System Suspension: Rubber Torsion Wheels: 6" x 6" 8 on 6.5" Bolt Circle Tires: 215/80R16 Radial Load Range G Finished Preparation: Sandblast Finish Coating: Powder Coat with Zinc Primer Electrical: Phillips Sealed Harness System with Rubber Isolated LED Lighting Decking: 2" Rough Surface No.1 Grade Fir with Fasteners at all Crossmembers Decking Width: 96"
SALES PRICE DOES NOT INCLUDE INBOUND FREIGHT, SALES TAX OR LICENSING/REGISTRATION FEES.....
*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE BASED ON CONTINUOUS IMPROVEMENTS
Price: Call
Specs and price subject to change… -
2021 VALOR 12TU UTILITY TRAILER
N-2457 — Valor Trailers / All
2021 VALOR 12TU UTILITY TRAILER
GVWR: 16,800 lbs. Capacity (Distributed): 13,880 lbs. Base Trailer Weight: 2,920 lbs. Frame Construction: 5” X 3” Tubular subframe and perimeter rails Crossmembers: 3”X 1.5” Tubular crossmembers on 16” centers Hitch: 2-5/16” Ball Coupler or 2.5” ID Lunette eye, adjustable height Landing Gear: 12,000 lb. capacity with drop foot Safety Chains: (2) 3/8” X 36” Grade 70 high tensile strength with slip hooks and safety latches Deck Latch: Over-center standard latch and safety pin Cushion Cylinder: 3” X 8” with internal metered flow to cushion loading and unloading Load Securement: 8 each (4 per side) 1” diameter D-rings and stake pockets Tool Compartment: Combination open tool tray and lockable toolbox Axles: (2) 7,000 lb. capacity Hubs: 8 on 6.5” bolt circle with 9/16” lug nuts Brakes: 12” x 2” electric brakes both axles with 12 Volt sealed breakaway system Suspension: Rubber torsion Wheels: 16” X 6” 8 on 6.5” bolt pattern Tires: ST235/80R16 Radial Load Range G Finish Preparation: Sandblast Finish Coating Powder Coat with zinc primer Electrical: Phillips sealed harness system with rubber isolated LED lighting Decking: 2” rough surface No. 1 grade Fir with fasteners at all crossmembers Decking: Width 82.5” Between fenders
*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE BASED ON CONTINUOUS IMPROVEMENTS
Price: Call
Specs and price subject to change… -
2021 VALOR 42TS 2-AXLE TILT DECK TRAILER W/ 6 FT. STATIONARY DECK
GVWR: 52,000 lbs. Capacity (Distributed): 39,820 lbs. Base Trailer Weight: 12,180 lbs. Frame Construction: Tubular subframe with high tensile strength perimeter rails Crossmembers: 5” Tubular crossmembers on 12” and 16” centers Hitch: 3” ID Lunette Eye. 9,000 lb. capacity, adjustable height Landing Gear: 35,000 lb. capacity with drop foot Safety Chains: (2) 1/2”X 36” Grade 70 high tensile strength with slip hooks and safety latches Deck Latch: Over-center type with tension adjuster, lever and safety pin Cushion Cylinder: 4”X16” with internal metered flow to cushion loading and unloading Load Securement: 14 each (7 per side) 2-way chain slot/stake pocket system 10 each (5 per side) 1" diameter rings Tool Compartment: Combination open tool try and lockable toolbox Axles: Qty: (2) 25,000 lb. capacity Hubs: 8 on 275mm bolt circle with M22 lug nuts Brakes: 16-1/2" x 7" s-cam full air brakes with maxi spring brakes on both axles, automatic slack adjusters, equipped with 2S/2M ABS Suspension: Tandem axle with fabricated hangers and axle alignment capability Wheels: 22.5” X 6.75” Uni-mount 8 on 275mm bolt pattern Tires: 255/70R 22.5 Radial Load Range H Finish Preparation: Sandblast Finish Coating: Powder Coat with Zinc primer Electrical: Phillips sealed harness system with rubber isolated LED lighting Decking: 2” Rough surface No. 1 grade Fir with fasteners at all crossmembers Deck Width: 102"
SALES PRICE DOES NOT INCLUDE FET, INBOUND FREIGHT, SALES TAX OR LICENSING/REGISTRATION FEES.....
Price: Call
Specs and price subject to change… -
2020 BULK 5,600 GAL. 1 COMPT. 2-AXLE X-RING SEMI TANK TRAILER
N-1935 — Tank Trailers / External Ring - Non-Code
2020 BULK 5600 GALLON SINGLE COMPARTMENT 2-AXLE X-RING SEMI TANK TRAILER
NON-SPEC, 5600 gallon, single compartment with (2) 10 gauge T304LSS-2B finish baffles, 30” drop/double conical/equal split, SS channel circumferential stiffing rings, stainless sub-frame material, 13# max. product, 150# max. product temp., 10 gauge stainless T304SS-2B finish head material, 12 gauge T304SS-2B finish shell material, 20” full opening manhole with SS spilldam around manhole & (2) 1-½” drain hoses, (2) 3” cleanouts in top of tank shell, (1) 4” x 4” x 90 degree SS elbow connected to spool piece extending to curbside, (1) 4” Betts WD400ALB butterfly valve with SS adapter & dust cap, (1) Betts # 6460463SSV pressure/vacuum vent located on manhole cover, curbside stainless ladder, 8” x 21’ hose tube with doors on each end mounted on curbside (no hoses), front & rear aluminum contour fenders with SS braces, Jost 2 speed landing gear, Hendrickson Intraax air ride suspension, Hendrickson TIREMAAX PRO tire inflation system, Meritor RRS roll stability and ABS brakes, 10-hole hub piloted 22.5 aluminum wheels, 11R22.5 tires, black undercarriage paint…….
Price: Call
Specs and price subject to change… -
2020 BULK 5,600 GAL. 1 COMPT. 2-AXLE X-RING SEMI TANK TRAILER
N-1934 — Tank Trailers / External Ring - Non-Code
2020 BULK 5600 GALLON SINGLE COMPARTMENT 2-AXLE X-RING SEMI TANK TRAILER
NON-SPEC, 5600 gallon, single compartment with (2) 10 gauge T304LSS-2B finish baffles, 30” drop/double conical/equal split, SS channel circumferential stiffing rings, stainless sub-frame material, 13# max. product, 150# max. product temp., 10 gauge stainless T304SS-2B finish head material, 12 gauge T304SS-2B finish shell material, 20” full opening manhole with SS spilldam around manhole & (2) 1-½” drain hoses, (2) 3” cleanouts in top of tank shell, (1) 4” x 4” x 90 degree SS elbow connected to spool piece extending to curbside, (1) 4” Betts WD400ALB butterfly valve with SS adapter & dust cap, (1) Betts # 6460463SSV pressure/vacuum vent located on manhole cover, curbside stainless ladder, 8” x 21’ hose tube with doors on each end mounted on curbside (no hoses), front & rear aluminum contour fenders with SS braces, Jost 2 speed landing gear, Hendrickson Intraax air ride suspension, Hendrickson TIREMAAX PRO tire inflation system, Meritor RRS roll stability and ABS brakes, 10-hole hub piloted 22.5 aluminum wheels, 11R22.5 tires, black undercarriage paint…….
Price: Call
Specs and price subject to change…
